| Customization: | Available |
|---|---|
| Media: | Gas, Oil, Water, Chemical |
| Temperature: | Low Temperature |
|
Still deciding? Get samples of US$ 2/Piece
Request Sample
|
Suppliers with verified business licenses
American standard forged steel gate valve and flange gate valve belong to the same type of valve, the difference is that its closing part is a ball, and the ball rotates around the center line of the valve body to achieve opening and closing. Gate valves are mainly used to cut off, distribute and change the flow direction of media in pipelines. Two-piece ball valve and three-piece ball valve are a new type of valves widely used in recent years. Generally, these valves should be installed horizontally in pipelines.
Positive Sealing: They provide tight shut-off, minimizing leakage when closed, which is crucial for applications requiring precise flow control.
Bi-Directional Flow: Gate valves can regulate flow in both directions, making them versatile for various piping systems.
Low Pressure Drop: When fully open, gate valves create minimal obstruction to flow, resulting in lower pressure drop across the valve compared to other types.
Durability: Constructed with robust materials, ANSI gate valves are designed for long-term use in demanding environments, offering excellent resistance to wear and corrosion.
Versatility: They are suitable for a wide range of fluids and temperatures, making them suitable for diverse industrial applications.
Ease of Maintenance: ANSI gate valves are relatively simple in design, facilitating easier maintenance and repair procedures, which helps reduce downtime.
Straight-Through Flow: When fully open, gate valves provide a straight-through flow path, minimizing turbulence and pressure loss.American Standard cast steel gate valve is to rotate the valve love to make the valve open or closed. Gate valve switch lightweight, small size, can be made into a large calibre, reliable sealing, simple structure, easy maintenance, sealing surface and the ball surface is often in a closed state, is not easy to be eroded by the medium, in various industries have been widely used.
Pressure seal bonnet gate valves are ideal for high-pressure applications (more than 15 MPa). Pressure seal bonnets have a downward-facing cup inserted into the valve body. When internal fluid pressure increases, the cup is forced outward, improving the seal.
The gate is raised and lowered by the spinning of a threaded stem (Figure 2 Labeled B). As discussed, a manual wheel or actuator spins the stem. Depending on the design, it is either considered a rising stem gate valve or a non-rising stem gate valve. So, as you spin the stem, it either raises or stays in place with the spin.
Outside Screw and Yoke , also referred to as rising stems, are fixed to the gate. Therefore, the threads are on the actuation side. So, as the gate is raised or lowered, the stem moves with it up and down. Consequently, they have built-in visual indicators of the state of the valve and are easily lubricated. Since they have moving components, they cannot be used with bevel gears or actuators. Therefore, rising gate valves are suitable for manual actuation.
On the other hand, a non-rising stem is fixed to the actuator and threaded into the gate. An indicator is often threaded onto the stem to show the open or closed state of the valve. Non-rising gate valves are common in underground installations and applications with limited vertical space.
| Manufacture Standard Of Gate Valve | API 600 ASME B16.34 / KS B2361 / GB/T 12234 / DIN 3352 |
| Valve Connection | Flanged |
| Connection Type | ANSI, JIS, DIN, GB |
| Valve Material | CF8, CF8M, WCB |
| Power Supply | General: 3-phase 380VAC
Special: 3-phase AC660V, AC440V, AC415V Special: 1-phase AC220V, AC110V Special: DC12V, DC24V, DC48V |
| Torque Range | 50Nm to 10,000Nm |
| Protection Class | IP65 |
| Insulation Class | F Class |
| Ambient Temperature | -4°F to 140°F |
){kind=link}