| Customization: | Available |
|---|---|
| Media: | Gas, Water, Steam |
| Material: | Ss,Carbon Steel |
|
Still deciding? Get samples of US$ 9/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
A high pressure industrial ball valves are a type of valves designed to handle high-pressure fluids or gases in industrial applications. It consists of a hollow sphere (the ball) with a hole or bore in the center. The ball has a through-hole or passage that allows the flow of the fluid or gas when aligned with the valve's inlet and outlet ports.
The ball valve operates by rotating the ball 90 degrees using a handle or actuator, which changes the alignment of the hole or passage. When the hole aligns with the inlet and outlet ports, the valve is open, allowing the fluid or gas to flow through. When the hole is perpendicular to the ports, the valve is closed, stopping the flow.
a) Unique, the metal seated ball valve with patented single-seat ball valve design. It has a flat spring set acting through a hard-faced bearing against the bottom ball shaft which provides sufficient initial ball-seat load for valve tightness, even at low delta P.
b) Metal seated ball valve proven in qualification tests and field operation to be solids-proof, even for the toughest applications on slurry service with solids particles.
c) Tightness rates: Allowable leakage rate at full Delta P: ASME/ FCI 70-2 Class VI/V. Tighter shutoff available upon request.
The leakage rate also can be customization from end-user request
d) The metal seated ball valve with standard extension bonnet/stem, whose design base on the different temperature range.
e) Uni-directional or bi-directional sealing
The valve plate of the high-temperature sanitary ball valve and the sealing surface of the valve seat are oblique conical structures with temperature and corrosion-resistance alloy material welded on the inclined cone surface of the valve plate. These specialized alloys allow the valve plate and seat to withstand routine wear and tear caused by corrosive chemicals and abrasive mediums.
The spring fixed between regulating ring pressure plates is assembled together with the regulating bolt on the pressure plate. This structure effectively compensates for the tolerance zone between the sleeve and the valve body as well as the valve stem's elastic deformation from the system's high pressure. These components solve the valve's sealing problem in the process of two-way interchangeable medium transportation.
Materil List
| No. | Part Name | WCB/F316+Stellite | LCB/F316+TCC | CF8M/F316+Cr3C2 |
| 1 | Nut | ASTM A194 2H | ASTM A194 2HM | ASTM A194 8M |
| 2 | Bolt | ASTM A193 B7 | ASTM A193 B7M | ASTM A193 B8M |
| 3 | Bonnet | ASTM A216 WCB | ASTM A216 WCB | ASTM A351 CF8M |
| 4 | Gasket | SS304+Graphite | SS316+Graphite | SS316+Graphite |
| 5 | Seat Seal | Graphite | Graphite | Graphite |
| 6 | Spring Seat | Stainless Steel | Stainless Steel | Stainless Steel |
| 7 | Spring | Inconel X-750 | Inconel X-750 | Inconel X-750 |
| 8 | Seat | A182 F316+Stellite | A182 F316+TCC | A182 F316+Cr3C2 |
| 9 | Ball | A182 F316+Stellite | A182 F316+TCC | A182 F316+Cr3C2 |
| 10 | Body | ASTM A216 WCB | ASTM A216 WCB | ASTM A351 CF8M |
| 11 | Stem | ASTM A182 F316 | ASTM A182 F316 | ASTM A182 F316 |
| 12 | Thrust Washer | SS304+Graphite | SS316+Graphite | SS304+Graphite |
| 13 | Packing | Graphite | Graphite | Graphite |
| 14 | Packing Gland | ASTM A216 WCB | ASTM A216 WCB | ASTM A351 CF8M |
| 15 | Bolt | ASTM A193 B7 | ASTM A193 B7M | ASTM A193 B8M |
| 16 | Nut | ASTM A194 2H | ASTM A194 2HM | ASTM A194 8M |
| 17 | Lock | Cast Iron | Cast Iron | Cast Iron |
| 18 | Hand Stop | Carbon Steel | Carbon Steel | Carbon Steel |
| 19 | Lever | Carbon Steel | Carbon Steel | Carbon Steel |
| 20 | Gasket | Carbon Steel | Carbon Steel | Carbon Steel |
| 21 | Stud | ASTM A193 B7 | ASTM A193 B7 | ASTM A193 B7 |
){kind=link}