Media: | Gas, Water, Steam |
---|---|
Material: | Ss,Carbon Steel |
Connection Form: | Double Flange |
Driving Mode: | Electric, Manual |
Nominal Pressure: | PN1.0-32.0MPa |
Channel: | Straight Through Type |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
The chip ball valve can be divided into straight-through type, three-way type and right-angle type according to its channel position.
The latter two ball valves are used to distribute the medium and change the flow direction of the medium.
The installation and maintenance of three-piece ball valve should pay attention to the following:
1.
Leave a position for the handle to rotate.
two..
It cannot be used to reduce expenditure.
3 the ball valve with belt transmission mechanism should be installed upright.
Second, the working principle of Q11F chip ball valve is to make the valve unblocked or blocked by rotating valve love.
The ball valve switch is portable, small, can be made into a large caliber, reliable sealing, simple structure, convenient maintenance, sealing surface and spherical surface are often in a closed state, not easy to be eroded by the medium, so it has been widely used in various industries.
Third, the chip ball valve is mainly used to cut off, distribute and change the flow direction of the medium in the pipeline.
Ball valve is a new type of valve widely used in recent years, which has the following advantages:
1. The fluid resistance is small, and its resistance coefficient is equal to that of the pipe segment of the same length.
2. Simple structure, small size and light weight.
3. Tight and reliable, the sealing surface material of the current ball valve is widely used plastic, good sealing, and has been widely used in the vacuum system.
4. The utility model has the advantages of convenient operation, quick opening and closing, and only 90 °rotation from full opening to full closing, which is convenient for long-distance control.
5. The maintenance is convenient, the structure of the ball valve is simple, the sealing ring is generally movable, and it is convenient to disassemble and replace.
6. When fully open or closed, the sealing surface of the sphere and the valve seat is isolated from the medium, and when the medium passes through, it will not cause erosion of the sealing surface of the valve.
7. It has a wide range of applications, ranging from small to a few millimeters, to a few meters, and from high vacuum to high pressure.
When the ball rotates 90 degrees, it should all present a sphere at the entrance and exit, thus cutting off the flow.
Chip ball valve is a relatively new type of ball valve, it has some unique advantages of its own structure, such as no friction switch, seal is not easy to wear, opening and closing torque is small.
This reduces the specification of the actuator.
Equipped with multi-rotary electric actuator, the medium can be adjusted and tightly cut off.
It is widely used in petrochemical industry, urban water supply and drainage and other working conditions requiring strict cut-off.
a) Unique, the metal seated ball valve with patented single-seat ball valve design. It has a flat spring set acting through a hard-faced bearing against the bottom ball shaft which provides sufficient initial ball-seat load for valve tightness, even at low delta P.
b) Metal seated ball valve proven in qualification tests and field operation to be solids-proof, even for the toughest applications on slurry service with solids particles.
c) Tightness rates: Allowable leakage rate at full Delta P: ASME/ FCI 70-2 Class VI/V. Tighter shutoff available upon request.
The leakage rate also can be customization from end-user request
d) The metal seated ball valve with standard extension bonnet/stem, whose design base on the different temperature range.
e) Uni-directional or bi-directional sealing
The valve plate of the high-temperature sanitary ball valve and the sealing surface of the valve seat are oblique conical structures with temperature and corrosion-resistance alloy material welded on the inclined cone surface of the valve plate. These specialized alloys allow the valve plate and seat to withstand routine wear and tear caused by corrosive chemicals and abrasive mediums.
The spring fixed between regulating ring pressure plates is assembled together with the regulating bolt on the pressure plate. This structure effectively compensates for the tolerance zone between the sleeve and the valve body as well as the valve stem's elastic deformation from the system's high pressure. These components solve the valve's sealing problem in the process of two-way interchangeable medium transportation.
Materil List
No. | Part Name | WCB/F316+Stellite | LCB/F316+TCC | CF8M/F316+Cr3C2 |
1 | Nut | ASTM A194 2H | ASTM A194 2HM | ASTM A194 8M |
2 | Bolt | ASTM A193 B7 | ASTM A193 B7M | ASTM A193 B8M |
3 | Bonnet | ASTM A216 WCB | ASTM A216 WCB | ASTM A351 CF8M |
4 | Gasket | SS304+Graphite | SS316+Graphite | SS316+Graphite |
5 | Seat Seal | Graphite | Graphite | Graphite |
6 | Spring Seat | Stainless Steel | Stainless Steel | Stainless Steel |
7 | Spring | Inconel X-750 | Inconel X-750 | Inconel X-750 |
8 | Seat | A182 F316+Stellite | A182 F316+TCC | A182 F316+Cr3C2 |
9 | Ball | A182 F316+Stellite | A182 F316+TCC | A182 F316+Cr3C2 |
10 | Body | ASTM A216 WCB | ASTM A216 WCB | ASTM A351 CF8M |
11 | Stem | ASTM A182 F316 | ASTM A182 F316 | ASTM A182 F316 |
12 | Thrust Washer | SS304+Graphite | SS316+Graphite | SS304+Graphite |
13 | Packing | Graphite | Graphite | Graphite |
14 | Packing Gland | ASTM A216 WCB | ASTM A216 WCB | ASTM A351 CF8M |
15 | Bolt | ASTM A193 B7 | ASTM A193 B7M | ASTM A193 B8M |
16 | Nut | ASTM A194 2H | ASTM A194 2HM | ASTM A194 8M |
17 | Lock | Cast Iron | Cast Iron | Cast Iron |
18 | Hand Stop | Carbon Steel | Carbon Steel | Carbon Steel |
19 | Lever | Carbon Steel | Carbon Steel | Carbon Steel |
20 | Gasket | Carbon Steel | Carbon Steel | Carbon Steel |
21 | Stud | ASTM A193 B7 | ASTM A193 B7 | ASTM A193 B7 |
Suppliers with verified business licenses