| Customization: | Available |
|---|---|
| Media: | Gas, Water, Steam |
| Material: | Ss,Carbon Steel |
|
Still deciding? Get samples of US$ 9.9/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Pneumatic Actuated 3 Way diverting Flanged PN16 or ANSI 150 Stainless Steel Ball Valve provides safe operation for both general and industrial chemical applications, offering superior performance and reliability. A pneumatically actuated 3 way full bore valve with Stainless Steel body and reinforced PTFE seat.
Actuation is either Single or Double acting with a range of configurable options including limit switches, solenoid valves and positioners.
In addition, our pneumatic quarter turn rack and pinion actuator is sized with a 30% safety factor built-in, requiring a pilot pressure of 5.5 Bar and benefits from a Namur interface for both pilot solenoid valve and switchbox.
Although there are numerous parts making up the valve the basic components are made up of the following:
Also referred to as the valve housing or shell, it contains all the inner components of the valve. Usually composed of a rigid metal, in this case Stainless Steel, it protects all the internal components and keeps them in the correct position and aligned for proper functioning. It also facilitated access for the external handle to connect with and rotate the internal ball, via the stem. The valve body comes in three assembly options: one-piece, two piece and three-piece designs.
This is the part that gave the valve its name. It is a ball that has "flow path" known as a bore, through the center that allows the medium to flow through it. The ball is rotated by the stem, which either opens the flow when the bore is in-line with the pipe or closes the flow when the bore is perpendicular to the flow. There are two types of bore design: Full port and Reduced port.
Also referred to as the shaft, it connects the external handle that rotates the inner ball. The Stem has washers and packing rings to ensure a tight seal and to prevent any leaks. The stem is rotated as the handle is turned, which in turn rotates the ball, opening and closing the flow.
The Seat sits between the ball and the valve body and ensures a water tight seal. There are two seats that sit on either side of the ball and are usually composed of (PTFE).
The handle is also often called the lever. it a standard ball valve it is the manual way used to turn the ball valve to the open or closed position.
){kind=link}