Carbon or Stainless Steel Forged or Cast Ball Valve

• Customization: Available
• Media: Gas, Water
• Material: Stainless Steel, Carbon Steel, Cast Iron
• Connection Form: Flange, Weld
• Driving Mode: Manual, Electric
• Nominal Pressure: ASME150-ASME-2500
• Channel: Straight Through Type
• Structure: Floating Ball Valve
• Type: Floating Ball Valve
• Temperature: High Temperature
• Standard: API
• Application: Industrial Usage, Water Industrial Usage, Household Usage
• Delivery Time: 15-25 Days
• Transport Package: Wooden Case
• Specification: customized
• Trademark: yoonad
• Origin: China
• HS Code: 8481804090
• Production Capacity: 10000PCS/Year

Product Description

A ball valve is a flow control device which uses a hollow, perforated, and pivoting ball to control fluid flowing through it. It is open when the hole through the middle of the ball is in line with the flow inlet, and closed when it is pivoted 90 degrees by the valve handle, blocking the flow.

They can be operated manually or by using an actuator. The simplest operation of a ball valve is through the use of a wrench or a lever manually turned by an operator. Torque is applied to rotate the lever arm by 900 by either clockwise or counterclockwise to open or close the valve. If the lever arm is parallel to the pipe, it indicates that the valve is open. If the lever arm is perpendicular to the pipe, it indicates that the valve is closed.

Ball Valves are used for flow and pressure control and shut off for corrosive fluids, slurries, normal liquid, and gases. They are used in the oil and natural gas industry, but also find a place in many manufacturing sectors, chemical storage, and even residential uses.


Ball valves are simple to operate and maintain
Quick to open
Can be operated manually or by actuation
Causes little turbulence when fully open
Has a low pressure drop and can handle relatively high flow capacities


Ball valve is a shut-off valve that allows, obstructs, and controls the flow of liquids, gases, and vapors in a piping system by rotating the ball having a bore inside the valve. The ball is mounted against two seats and has a shaft that connects it to the operating and control mechanism that rotates the ball. When the cross-section of the bore is perpendicular to the area of the flow, the fluid is not permitted to pass through the valve. The fluid flows through from the valve, and the fluid flow rate depends on the area of the bore exposed to the flow.



The primary components of a gate valve include the body, bonnet, ball, stem, and seat.
 

DN mm	Flange drilling	L mm	H mm	H3 mm	F mm	F1 mm	F2 mm
40	PN10/16	240	200	263	14	16	30
50	PN10/16	250	209	292	14	16	30
65	PN10/16	270	243	336	17	20	34
80	PN10/16	280	282	382	17	20	34
100	PN10/16	300	319	429	19	22	34
125	PN10/16	325	346	471	19	22	34
150	PN10/16	350	403	493	19	22	34
200	PN10/16	400	490	660	24	28	34
250	PN10/16	450	664	864	27	31	47
300	PN10/16	500	740	968	27	31	47
350	PN10/16	550	947	1207	32	37	55
400	PN10/16	600	959	1249	32	37	55
450	PN10/16	650	958	1278	32	37	55
500	PN10/16	700	958	1316	32	37	55